TOYOTA特别测试项目
TOYOTA Special Test Project
| 试验项目：Steady-state system | |
| 试验标准： TSC0502G，TSC7001G | |
| 6.1.1 | Power supply voltage characteristics test |
| 6.1.2 | Overvoltage test |
| 6.1.3 | Reversed polarity test |
| 试验项目：Direct application of transient phenomena | |
| 试验标准： TSC0502G，TSC7001G | |
| 6.2.1 | Power supply circuit negative surge test (20ms tau） Test 1 (high-frequency pulse) (52uS tau) Test voltage 73V at 25 ohm load, 80V at 1K ohm load |
| 6.2.2. | L load connecting circuit surge test |
| 6.2.3 | Power supply circuit positive surge test Test 1 (high-frequency pulse) (52uS tau) Test voltage 73V at 25 ohm load, 80V at 1K ohm load Test 2 (Giant Pulse) (188mS tau) Test voltage 100V at 25 ohm load, 110V at 1K ohm load Test 3 (high-frequency pulses on 30V 300ms positive pole surge) |
| 6.2.4 | Ignition pulse test |
| 试验项目：Direct application of transient phenomena | |
| 试验标准： TSC0502G，TSC7001G | |
| 6.3.1 | Induction noise resistance test Test 1 (Test Waveform generator for Damped Oscillating Waveform) Test 2 (test with the actual electrical loads) |
| 6.3.2 | Floating ground test |
| 6.3.3 | High-voltage noise test Test condition 1 (continuous test) Pulse frequency fp 1.25/2.5/5/10/50 kHz, test voltage Vp-p 220/105/15V, test time >10s Test condition 2 (burst test) pulse frequency fp range 100k-1000kHz, in a step of 10kHz, 90 test fp points in total, number of pulses 10 in a single burst, burst frequency fb 100Hz, test repeated 10 times |
友情链接： 汽车仪表盘检测 动力电池E-MARK 摩托车仪表盘检测
